If your dishwasher is leaking, dishes aren’t coming out clean or any other issue, the technicians at AB Phoenix Appliance Repair Team can handle it. Bosch, Kenmore, Whirlpool, Maytag, GE and Kitchen Aid are a few brands of dishwashers we repair.
Give us a call and have your dishes sparkling again in no time!
No Power to dishwasher.
1. Check for tripped circuit breaker or blown fuse.
2. Check wall socket for power.
If the dishes are not getting clean.
1. Make sure the water is hot enough. It should be at least 140 degrees, which is hot enough to burn you - VERY HOT! If it is not hot enough, turn the hot water heater thermostat up to a higher setting.
2. Make sure the lower spray arm is unobstructed and turning freely.
3. Make sure the bottom inside the dishwasher is clean and free of debris.
4. Make sure you are following the proper loading procedures. Use the proper amount of detergent and make sure the detergent is fresh (check expiration or "best if used by" date).
5. Mold may grow in your dishwasher if you use it infrequently. The mold can be removed by using the normal dishwasher detergent and running the dishwasher, preferably without any dishes.
If the door isn't closing.
1. Make sure the latch assembly is unrestricted and latching properly. Make sure nothing is blocking the door from opening and closing properly.
It isn’t draining.
1. Air Gap is clogged. Unscrew top cap and see if there is anything blocking it.
2. Drain hose is clogged Remove and clean the hose.
If the unit is leaking.
1. Make sure you are following the proper loading procedures, including proper type and amounts of detergents. Run the unit through cycle while empty - if it doesn't leak, it's probably a loading problem.
2. Make sure the racks are positioned properly.
3. Make sure the door is unrestricted around the opening.